Composite Materials(1st Edition) Testing and Design (seventh Conference) : a Conference : Philadelphia, PA, 2-4 April 1984 by James Martin Whitney, James M. Whitney, AstmIntl Pasta Dura, 457 Pages, Published 1986 by AstmIntl ISBN-13: 978-0-8031-0447-1, ISBN: 0-8031-0447-2
"2 — Displacements at a bolt BREPAIR program. the series from the boundary
collocation is used to find the stresses at any interior point. ... The deformation of
the repaired skin is equal to the deformation of the unrepaired skin minus the
deformations caused by the bolt load. This in turn must be equal to the
deformation of the patch and the bolt under the effect of the bolt load plus the bolt
clearance. A(Repaired Skin) = A(Patch ..."
Cleaning stone and masonry a symposium sponsored by ASTM Committee E-6 on Performance of Building Constructions, Louisville, KY, 18 April 1983 by James R. Clifton, AstmIntl Paperback, 176 Pages, Published 1986 by AstmIntl ISBN-13: 978-0-8031-0932-2, ISBN: 0-8031-0932-6
"Summary. The symposium on The Cleaning of Stone and Other Masonry, which
was sponsored by ASTM Committee E-6 on Performance of Building
Constructions, and on which this publication is based, resulted in the
dissemination of information on cleaning materials and practices, primarily for
historic monuments and buildings, and methods for evaluating the effectiveness
of cleaning projects. During the past decade, national concern for th ..."
Building Performance Function, Preservation, and Rehabilitation : a Symposium Sponsored by ASTM Committee E-6 on Performance of Building Constructions, Bal Harbour, FL, 17 Oct. 1983 by G. Davis, Gerald Davis, AstmIntl Paperback, 196 Pages, Published 1986 by AstmIntl ISBN-13: 978-0-8031-0458-7, ISBN: 0-8031-0458-8
"... handling as part of the primary functions. In only 10 years the building had
undergone serious internal physical changes. Its all-embracing aesthetic unity
has been severely destroyed. One can observe the complete misfit of third-
generation office machines on second-generation furniture in first-generation
office layout and finishes. The original architect's firm has not been
commissioned again to work on the re- adaptation of ..."
"Symposium on Industrial Dust Explosions : Pittsburgh, Pennsylvania, 10-13 June
1986 Kenneth L. Cashdollar, Martin Hertzberg. [14] Eckhoff, R. K., Fuhre, K., and
Pedersen, G. H., "Vented Maize Starch ... [16] Glor, M., "Hazards Due to
Electrostatic Charging of Powders," Journal of Electrostatics, Vol. 16, 1985, p.
175. [17] Luttgens, G., "Collection of Accidents Caused by Static Electricity,"
Journal of Electrostatics, Vol. 16, 1985 ..."
Blended Cements A Symposium (Astm Special Technical Publication// Stp) by Geoffrey Frohnsdorff, AstmIntl Hardcover, 168 Pages, Published 1986 by AstmIntl ISBN-13: 978-0-8031-0453-2, ISBN: 0-8031-0453-7
"[3 ] Emery, J. J. in Extending Aggregate Resources, ASTM STP 774, American
Society for Testing and Materials, Philadelphia, 1982, pp. 95-118. [4] Guyot, R.,
Ranc, R., and Varizat, A., "Comparison of the Resistance to Sulfate Solutions and
Seawater on Different Portland Cements With or Without Secondary Constituents,
" American Concrete Institute, SP-79, Vol. 1, pp. 453-469. [5] Mehta, P. K. in
Proceedings, Fifth International Sympos ..."
"REFERENCE: Crine, J. -P., "Newly Developed Analytical Techniques for
Characterization of Insulating Oils," Electrical Insulating Oils, ... The influence of
particles and metals in oil on a-c breakdown strength are also stressed, and an
ultrasonic agitation procedure is ... oils) need various analytical techniques and
methods to evaluate the overall physical, chemical, and electrical properties of
these fluids."
"W. Burton Blackburn, l Ivan Show, 2 Llewellyn Williams, 3 David R. Taylor, 4 and
Paul J. Marsden2. Collaborative. Study. of. the. Toxicity. Characteristic. Leaching.
Procedure. (TCLP). REFERENCE: Blackburn, W. B., Show, I., Williams, L., Taylor,
D. R., and Marsden, P. J., "Collaborative Study of the Toxicity Characteristic
Leaching Procedure (TCLP)," Waste Testing and Quality Assurance, ASTM STP
999, D. Friedman, Ed., American Soci ..."
"Martin Alexander, Cornell University; Kenneth W. Cummins, then of Oregon State
University; W. Thomas Edmonson, University of Washington; Charles R.
Goldman, University of California, Davis; John Harte, University of California at
Berkeley; Rolf Hartung, University of Michigan; Alan R. Isensee, U.S. Department
of Agriculture-SEA; Richard Levins, Harvard School of Public Health; J. Frank
McCormick, University of Tennessee; Tony J. Pe ..."
"A Symposium Bernard F. Kallas. PAVEMENT MAINTENANCE AND
REHABILITATION A symposium sponsored by ASTM Committee D-4 on Road
and Paving Materials Bal Harbour, FL, 7 Dec. 1983 ASTM SPECIAL TECHNICAL
PUBLICATION 881 Bernard F. Kallas, The Asphalt Institute, editor ASTM
Publication Code Number (PCN) 04-881000-08 ..."
"Safety Systems — Currently under development is a "Watchdog" safety computer
that will monitor robot joint velocity, acceleration, and position. ... the preliminary
results and integrated reports by many NBS staff and AMRF project team
members, too numerous to list and properly credit here. ... presented at 13th
International Symposium on Industrial Robots/Robots 7, Chicago, 111., 19 April
1983."
Engineering Dielectrics, Vol Iib Electrical Properties of Solid Insulating Materials : Measurement Techniques (Astm Special Technical Publication// Stp) by R. Bartnikas, Eugene Joseph Mcmahon, AstmIntl Hardcover, 589 Pages, Published 1987 by AstmIntl ISBN-13: 978-0-8031-0491-4, ISBN: 0-8031-0491-X
"41-44. [17] Inge, L. and Walther, A., Elektrotechnik und Maschinenbau, Vol. 52,
1934, pp. 243- 244. [18] Griinewald, F., Archivfur Elektrotechnik, Vol. 12, 1923, pp
. 79-100. [19] Rogowski, W., Elektrotechnik und Maschinenbau, Vol. 44, 1926, pp.
599-603. ... 330, and Bahre, W., Archivfur Electrotechnik, Vol. 31, 1937, p. 141. [
32] Sharbaugh, A. H. and Roberts, S. in Solid State Physics: Vol. 6, Part B—
Electrical, Magnetic and Optic ..."
"The wall construction consists of 1.9-cm stucco on metal lath with 1.27-cm
exterior plywood sheathing. The insulation consists of 15.2-cm batt fiberglass.
The interior finish consists of 1.37-cm drywall. The insulation thicknesses vary
somewhat throughout the building, but for purposes of analysis and design, an
average wall U value of 0.34 W/m2 • °C was assumed. The roof construction
consists of a normal built-up roof over 7.6-cm ..."
"A Symposium Sponsored by ASTM Committee D-20 on Plastics, Houston, TX, 11
-12 March 1985 Sandra L. Kessler ... Energy Measurements in Impact Testing
REFERENCE: Hodgkinson, J. M. and Williams, J. G., "Analysis of Force and
Energy Measurements in Impact Testing," Instrumented Impact Testing of Plastics
and Composite Materials, ASTM STP 936. ... The plane stress Gc from pendulum
energy was 11.3 kj/m2, and that from areas Under force-de ..."
"23 on (then) Chemical Analysis to allow the use of rapid methods of analysis for
cements. There was a basic consensus that this was needed because of the
rapid shift away from classical analytical chemistry to ... Consensus largely broke
down at this point because of the tradition that analytical methods be printed in
their entirety in the Annual Book of ASTM ... The approach of using a round-robin
test program for all methods in a ..."
"... Hellberg, S., Johansson, E., Lindberg, W., and Sjostrom, M. in Chemometics,
Mathematics and Statistics in Chemistry, Series C: Mathematical and Physical
Sciences, R. B. Kowalski, Ed., Vol. 138, NATO ASI Series, D. Reidel Publishing
Co., 1984, pp. 17-65. [22] Ribick, M. A., Dubay, G. R., Petty, J. D., Stalling, D. L.,
and Schmitt, C. J., Environmental Science and Technology, Vol. 16, 1982, p. 310.
[23] Schmitt, C. J., Zajicek, J ..."
Composite Materials Testing and Design (Astm Special Technical Publication// Stp) by John D., AstmIntl Hardcover, 488 Pages, Published 1988 by AstmIntl ISBN-13: 978-0-8031-0980-3, ISBN: 0-8031-0980-6
"Characterizing the Tensile Stress-Strain Nonlinearity of Polyacrylonltrile-Based
Carbon Fibers — i. m. kowalski 205 ... h. i. barker, and D. W. DOWELL 217 The
Development of a Satisfactory, Simple, Shear Fatigue Test for Unidirectional E-
Glass ... Growth Rates— ALAN J. RUSSELL AND KEN N. STREET 259 Failure
Mechanisms Growth of Elliptic Delaminations in ... shaw ming lee 356
Nondestructive Evaluation The Use of Acoustic Emission to ..."
"REFERENCE: Liechti, K. M. and Hanson, E. C, "An Examination of Mixed-Mode
Debonding in the Blister Test," Adhesively Bonded Joints: Testing, Analysis, and
Design, ASTM STP 981, W. S. Johnson, Ed., American Society for Testing and
Materials, Philadelphia, 1988, pp. 13-27. ABSTRACT: Crack opening
displacements normal to the plane of an interface crack in a blister specimen are
measured using optical interferometry. The displacements ..."
"Rudolph Bonaparte, * Robert D. Holtz, 2 and J. P. Giroud3 Soil Reinforcement
Design Using Geotextiles and Geogrids REFERENCE: Bonaparte, R., Holtz,
R. D., and Giroud, J. P., "Soil Reinforcement Design Using Geotextiles and
Geogrids," Geotextile Testing and the Design Engineer, ASTM STP 952, J. E.
Fluet, Jr., Ed., American Society for Testing and Materials, Philadelphia, 1987, pp.
69-116. ABSTRACT: This paper provides an overview of ..."
"A Symposium Sponsored by ASTM Committee D-22 on Sampling and Analysis of
Atmospheres, Boulder, CO, 12-16 Aug., 1985 ; John K. Taylor, Editor John
Keenan Taylor. Another example of conversion is ... References [1] Hughes, E. E.
, Dorko, W. D., Scheide, E. P., Hall, L. C, Beilby, A. C, and Taylor, J. K., "Gas
Generating Systems for the Evaluation of Gas Detecting Devices," NBSIR 73-292,
National Bureau of Standards, Gaithersburg, MD, ..."